
2007 Dodge Sprinter 2500 3.0L Hesitation, MIL Lamp on
Vehicle came in with it being in limp mode turbo was not engaging had an 06 with the same problem replaced the turbo and fixed it but this 07 is a different monster. I replaced the actuator because it was not moving and had a code for it being open and was stu...
Summary posted 6/8/2012
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)6 Replies Received(Hide Replies)6 Replies Received
|
Message Closed w/Summary
|
VIN | WD0PE84557 |
Engine | 3.0 L / 6 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / Turbo not engaging |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, MIL Lamp On |
Occurs | Always |
Trouble Codes
2513 | intake port swirl actuator possitioner error |
2623 | Charge air sys. Drift idle |
2626 | Dpf Soot Content to high |
2953 | intake port swirl actuator open / sensor valve too low |
Message Closed w/Summary
Vehicle Data
2007 Dodge Sprinter 2500
VIN | WD0PE84557 |
Engine | 3.0 L / 6 cyl / DIESEL |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / Turbo not engaging |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, MIL Lamp On |
Occurs | Always |
Trouble Codes
2513 | intake port swirl actuator possitioner error |
2623 | Charge air sys. Drift idle |
2626 | Dpf Soot Content to high |
2953 | intake port swirl actuator open / sensor valve too low |