|
2008 Subaru Tribeca Limited 3.6L MIL Lamp on, can't clear codes
Vehicle came in with flashing CEL. Had 6 oxy sensor related codes. Codes will not clear. The o2 sensors did not respond. Replaced main relay. Now sensors are working but codes will not clear.
FIX posted 1/2/2018
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 6 Replies Received (View Replies)6 Replies Received (Hide Replies)
|
Message Closed
|
6 Replies Received
6 Replies Received
Related Documents & Media | VIN | 4S4WX92D38 |
| Engine | 3.6 L / 6 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp on, Can't Clear Codes |
| Occurs | Always |
Trouble Codes
| P0140 | Heated Oxygen Sensor (Bank 1 Sensor 2) Insufficient Activity Detected |
| P0160 | Heated Oxygen Sensor (Bank 2 Sensor 2) Insufficient Activity Detected |
| P1152 | Fuel Rail Pressure - Positive Deviation Fuel Pressure Solenoid Set Point |
| P1153 | Heated Oxygen Sensor (Bank 2 Sensor 1) Insufficient Switching |
| P1154 | Heated Oxygen Sensor (Bank 2 Sensor 1) Transition Time Ratio |
| P1155 | Fuel Rail Pressure - Rail Pressure Too High |
Message Closed
Vehicle Data
2008 Subaru Tribeca Limited
| VIN | 4S4WX92D38 |
| Engine | 3.6 L / 6 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp on, Can't Clear Codes |
| Occurs | Always |
Trouble Codes
| P0140 | Heated Oxygen Sensor (Bank 1 Sensor 2) Insufficient Activity Detected |
| P0160 | Heated Oxygen Sensor (Bank 2 Sensor 2) Insufficient Activity Detected |
| P1152 | Fuel Rail Pressure - Positive Deviation Fuel Pressure Solenoid Set Point |
| P1153 | Heated Oxygen Sensor (Bank 2 Sensor 1) Insufficient Switching |
| P1154 | Heated Oxygen Sensor (Bank 2 Sensor 1) Transition Time Ratio |
| P1155 | Fuel Rail Pressure - Rail Pressure Too High |
Video