|
2005 Mazda 6 i 2.3L Hesitation, Stall, MIL Lamp on
Hit the gas to pull out in traffic and its stutters and sometimes stalls. feather it and it goes. ltft -20 at idle stft -4. slightest touch of throttle ltft jumps down to about 2 stft 0. Cleaned the throttle plate, same results. Replaced MAF with known good ma...
Summary posted 8/25/2017
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 14 Replies Received (View Replies)14 Replies Received (Hide Replies)
|
Message Closed w/Summary
|
14 Replies Received
14 Replies Received
Related Documents & Media | VIN | 1YVFP80C55 |
| Engine | 2.3 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / sefi |
| Emissions | OBD-II Compliant |
| Symptoms | Hesitation, Stall, MIL Lamp On |
| Occurs | Idle |
Trouble Codes
| P0126 | Coolant Temperature Insufficient For Stable Operation |
| P0300 | Multiple Misfire Detected |
| P2177 | Power Steering Control Circuit High |
| P2188 | Fuel Trim System Rich At Idle Speed (Bank 1) |
| P2195 | Air Fuel Sensor (Bank 1 Sensor 1) Signal Stuck Lean |
Message Closed w/Summary
Vehicle Data
2005 Mazda 6 i
| VIN | 1YVFP80C55 |
| Engine | 2.3 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / sefi |
| Emissions | OBD-II Compliant |
| Symptoms | Hesitation, Stall, MIL Lamp On |
| Occurs | Idle |
Trouble Codes
| P0126 | Coolant Temperature Insufficient For Stable Operation |
| P0300 | Multiple Misfire Detected |
| P2177 | Power Steering Control Circuit High |
| P2188 | Fuel Trim System Rich At Idle Speed (Bank 1) |
| P2195 | Air Fuel Sensor (Bank 1 Sensor 1) Signal Stuck Lean |
Video