|
1988 Honda Prelude 2.0 S 2.0L Cuts out, MIL Lamp on, HIGH IDLE
Sorry to bother you all again, but I'm stumpped ! This vehicle will only set the mil light after it is very hot.(fan must come on at least once) While monitoring the o2 sensor, if you hold above 2,000 rpm, the voltage will gradually rise to .7v and flatline at...
FIX posted 4/20/1998
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle
|
Message Closed
|
Related Documents & Media 
| VIN | JHMBA4125J |
| Engine | 2.0 L / 4 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | CARB / CARB |
| Emissions | FED |
| Symptoms | Cuts Out, MIL Lamp on, High Idle |
| Occurs | Hot, Above 2000 RPM |
| Misc. | Carb |
Message Closed
Vehicle Data
1988 Honda Prelude 2.0 S
| VIN | JHMBA4125J |
| Engine | 2.0 L / 4 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | CARB / CARB |
| Emissions | FED |
| Symptoms | Cuts Out, MIL Lamp on, High Idle |
| Occurs | Hot, Above 2000 RPM |
| Misc. | Carb |
Video