
1992 Hyundai Scoupe 1.5L Excessive Emissions, Poor Idle Quality, Cuts out, MIL Lamp on
vehicle came into shop with rough idle,hesitation, poor engine performance. hooked modis up and found several codes (12,13,15,21,25) and started doing voltage checks at these sensors to verify control unit performance. found signal voltage approximately 7 volt...
Summary posted 4/3/2006
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed w/Summary
|
VIN | KMHVE3251N |
Engine | 1.5 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | FI / MPI SYSTEM |
Symptoms | Excessive Emissions, Poor Idle Quality, Cuts Out, MIL Lamp On |
Occurs | Not Applicable |
Trouble Codes
12 | mass air flow problem |
13 | intake air temp. circuit problem |
15 | motor position signal out of range |
21 | coolant temp signal out of range |
25 | baro pressure sensor circuit |
Message Closed w/Summary
Vehicle Data
1992 Hyundai Scoupe
VIN | KMHVE3251N |
Engine | 1.5 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | FI / MPI SYSTEM |
Symptoms | Excessive Emissions, Poor Idle Quality, Cuts Out, MIL Lamp On |
Occurs | Not Applicable |
Trouble Codes
12 | mass air flow problem |
13 | intake air temp. circuit problem |
15 | motor position signal out of range |
21 | coolant temp signal out of range |
25 | baro pressure sensor circuit |