ATG Schedule of Classes for November 2017
Posted to Industry Events Forum on 11/1/2017
5 Replies
Greetings, everyone!
The Automotive Training Group (ATG) has the following
classes available for the month of November 2017. All
classes run from 6:30 p.m. - 10:00 p.m. each night for both
evenings.
DURAMAX LML & LGH DIESEL ENGINE & EMISSIONS
DIAGNOSTICS: Diesel engines are very simple -- just
compress some air and fuel and you get combustion. However,
with the advent of common rail fuel pressurization and
delivery systems, diagnosis and repair became a complicated
and time-consuming game. Add variable vane turbochargers,
feedback EGR systems, and exhaust aftertreatment systems
like Diesel Particulate Filters, Selective Catalyst
Reduction, and Diesel Exhaust Fluid injection, and it's hard
to know where to start. Other published Duramax repair
information is inconsistent, and many of the flow charts run
you in circles performing tests that would actually take
days to complete. In contrast, our approach looks for
high-level indicators to make a better possible-cause list
and then offers multiple simple tests to trim that list as
quickly as possible without taking too much apart. Duramax
coverage includes special tools, workarounds, unused Scan
Tool functions, and other great shortcuts for ruling out
time-consuming tests. From a simple high-level pass to
system-specific tips, this seminar covers the entire
diagnostic process. We have included dozens of real world
examples to prove that these strategies will find the root
cause of your code or symptom in the shortest amount of
time.
*Pasco, WA: November 6th & 7th
*Spokane/Spokane Valley, WA: November 8th & 9th
ADVANCED CIRCUIT & ELECTRICAL TESTING: This
class is about using wiring diagrams as part of a larger
strategy to increase testing accuracy and decrease testing
time (and even the number of tests performed). We're
combining wiring information with codes, symptoms, system
interactions, Scan Tool PIDs & controls, and other
observations.
*Amarillo, TX: November 6th & 7th
SCAN TOOLS: BEYOND THE FLOWCHART: This
all-new Scan Tool seminar was built using a completely
different approach -- to show the best PIDs, controls and
other Scan Tool functions to use for each diagnosis. We've
reinvented Scan Tool training because button-pushing and
menu navigation don't make you more successful. Rather,
success comes when you know your Scan Tool so well that you
can set the flowchart aside and 'make up' your own
diagnostic path. Not only is this path more accurate -- it's
quite a bit shorter than the flowchart. There are dozens of
examples of this strategy in action, diagnosing the most
common faults. Come to learn these great new techniques for
zeroing right in on a root cause.
*Lubbock, TX: Nov. 8th & 9th
DIRECT INJECTION & AIR INDUCTION SYSTEMS
DIAGNOSTICS: This all-new training seminar is the
third in our popular Import series. Gasoline Direct
Injection (GDI) is simple in design but difficult to
diagnose because the traditional shortcuts of swapping out
parts and disassembling for inspection are not practical.
This is why we have adapted ATG's 'High Level Indicator'
approach for ruling out possible causes before parts come
off. The same approach applies to induction system
diagnostics where repair information is vague, component
access is difficult, and feedback loops are not always
available. For all systems covered, the approach is first
universal, and becomes manufacturer-specific only after the
possible cause and tool/test lists have been completed and
trimmed down. This seminar and manual were built by
analyzing actual diagnostic struggles and documenting the
shortest diagnostic paths for these systems. Because of this
practical approach, you won't be buried in useless
engineering detail -- only useful facts that you can measure
and that will help guide your diagnostic path. This seminar
continues the ATG tradition of saving you diagnostic time.
We're in the 'wasted test prevention' business, and we hope
you can attend!
*Marietta/Alpharetta, GA: November 6th & 7th
*Sacramento, CA: November 8th & 9th
*Atlanta/Hapeville, GA: November 8th & 9th
*Orlando, FL: November 13th & 14th
*Middleton/Hathorne, MA: November 15th & 16th
*Gold Beach, OR: November 27th & 28th
*Fort Collins, CO: November 27th & 28th
*Albuquerque, NM: November 27th & 28th
*Medford/White City, OR: November 29th & 30th
*Denver, CO: November 29th & 30th
*New Castle, DE/Elkton, MD: November 29th & 30th
*El Paso, TX: November 29th & 30th
Contact: Christina Rosenthal at (800) 233-3182 ext.
115 or e-mail: [...]
Cost per seat is $209 USD and includes the seat, training
manual and certificate. Discounts available for multiple
seat purchases.
Christina Rosenthal
Manager
The Automotive Training Group
San Diego, California, USA