Could not find any information on the proper torque sequence for a 2019 Transit-250. Found a source that uses the same sequence as a similar HD axle on f-250. Thought I would post it as there was no information in the knowledge base. I'm not stating that this is correct, just that I found a source (video below) and have used it myself, it appears to be within an acceptable range for how I was taught to set this style of hub bearing preload.

Torque ratcheting hub nut to 70 ft. lbs. ---- Reverse hub nut 180 degrees ------- Torque hub nut to 22 ft. lbs. ------- Verify hub turns with little enough resistance to slow and stop without hard drag or excessive freewheeling.

...... https://www.youtube.com/watch?v=g52LglWXHoM

David J Lang
Shop Foreman/Technician
Midas
South Burlington, Vermont, USA