| Professional Automotive Repair Technical Discussions for February 25, 2026 International Automotive Technicians' Network (iATN) - Members Only |
Next |
|
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2015 Ford F-350 Super Duty Platinum 6.7L MIL Lamp on VIN: 1FT8W3BTXF Vehicle came in with CEL on and no driveablility concerns. Retrieved fault code U02A3 for particulate sensor communication error. Found the PM sensor harness connector corroded and basically bonded to the PM sensor module. Replaced the PM sensor module ass... Trouble codes: U02A3 |
View | |
| 2016 Ford F-550 Super Duty XLT 6.8L No Start VIN: 1FDUF5GY3G Good afternoon and thanks in advance. 16 F-550 6.8l that died on the road. vehicle tries to start and then just cranks. We have checked for spark, and have constant good spark at all cylinders. The injector pulse is intermittent, and vehicle tries to start... |
View | |
| 2018 Ford F-150 XL 3.3L Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 1FTEX1EB1J Vehicle came in with p0017 code, found exhaust cam readings bank one at -12 at idle, all others at -4, performed enginge oil flush as this vehicle is not maintained as needed, and replaced actuator, code still present, replaced cam phasers and main timing ... Trouble codes: P0017 (Exhaust cam corrolation bank 1 solenoid b), P0108 (Map circuit high voltage), P0406 (Egr sensor circuit high), P0198 (Fuel rail pressure sensor circuit high), P0124 (Throttle position circuit a), U210F |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2015 Dodge Grand Caravan R/T 3.6L abs VIN: 2C4RDGBG6F It ended up just being a bad brake switch. The first replacement was a Dorman and was no good out of the box. Weirdly enough, faulty in the same way as the original. I got an OEM one and it fixed the issue. Is where I went wrong in my testing was not unpluggin... |
3 |