 Prev |
Professional Automotive Repair Technical Discussions for June 1, 2025 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2010 Ford F-150 SVT Raptor 6.2L No Start VIN: 1FTEX1E62A Cleared codes returned on key up. Check continuity from ecm to trans harness. Good, not open or grounded. Had trans fluid in connector. Cleaned and put dielectric grease in connector. Replaced molded lead frame in trans and pass though connector. Test drov... Trouble codes: P0706, P0706, P0706, P0706 |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2012 Ford F-250 Super Duty Lariat 6.7L No Start VIN: 1FT7X2BT8C Thank you to everyone who took the time to offer help! As one comment mentioned, the vehicle ran when it came in so it must be something I did during the repair. I explored that road extensively. I used several methods to bleed air from the system, includin... Trouble codes: P2291 (Low fuel pressure while cranking). |
6 | |
| 2012 Ford Fusion SEL 2.5L Cylinder head VIN: 3FAHP0JA9C John [...] Jun 1, 2025 12:13:30 PM ok Here is the information from ford's website this is for the 2.5 non hybrid. Install the cylinder head and 10 new bolts. Tighten the bolts in the sequence shown in 5 stages: Stage 1: Tighten to 7 Nm (62 lb-in). Stage 2: ... |
1 |
