 Prev |
Professional Automotive Repair Technical Discussions for July 3, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2017 Hyundai Accent SE 1.6L a/c VIN: KMHCT5AE9H hello everyone need a little guidance, a/c was not blowing cold, checked pressures and was 80 low side and 120 high side and low side was fluctuating 80 to 100 for a few seconds then stabilized on 80/120, evc was on when commanded, replaced compressor then... |
View | |
| 2000 Lexus LS400 4.0L Oil Pump VIN: JT8BH28F7Y Big mess inside timing cover area was present when replacing timing belt, water pump and front crankshaft seal.Engine oil is confirmed to be leaking from 12 O;clock position of oil pump to block. Is it realistic to remove both upper and lower oil pans in c... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2014 Subaru WRX 2.5L Timing VIN: JF1GV7E64E After a few weeks of struggling this car has been fixed, I replaced camshaft actuators on both banks, cleared light, drove vehicle over 50 miles without any returning trouble codes, readiness monitors are complete and this vehicle is ready for smog. Thank you ... |
15 | |
| 2014 Subaru WRX 2.5L MIL Lamp on VIN: JF1GV7E64E With the help of some of you guys and over at Diag.net, I was able to acquire a known good cam crank correlation for this vehicle which I will post below. But I also learned that sometimes the signal from the camshaft will be inverted, no need to worry as this... Trouble codes: P0016, P0018. |
4 |
