 Prev |
Professional Automotive Repair Technical Discussions for March 29, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2013 Ford F-150 FX4 3.5L Excessive Emissions, MIL Lamp on VIN: 1FTFW1ET5D Thanks in advance. This truck is kicking my back side. Customer stated crank no start (of course it started for me when tow truck dropped it off). Scanned and got codes P0172, P0175, P0087, and p0463. Relpaced primary pump and reset KAM. Ran KOEO and Koer ... Trouble codes: P0087 (Fuel rail psi low), P0463 (Fuel level A high), P0172 (Rich B1), P0175 (Rich B2) |
View | |
| 2014 Ford Edge Limited 3.5L on accel VIN: 2FMDK4KC2E Hello everyone Have this Edge in the shop for a noise in the rear and what was thought to be a miss fire. We replaced the RDU rear drive unit because it was making a grinding noise and the fluid was empty. After the repair we road tested and now have no no... |
View | |
| 2015 Ford Taurus SEL 3.5L Misfire, MIL Lamp on VIN: 1FAHP2E82F Car had misfire on cylinders 1, 2 and 3. Code was set for cam sensor and only repair fix I found. Replaced all 4 sensors. There is no 5 volt reference voltage at the pcm connector or cam senor on bank 1 or 2. They use 2 vref wires out of pcm to each bank t... Trouble codes: P3650, P3690, P3010, P3020, P3030 |
View | |
| 2007 Mercury Mountaineer 4.0L Misfire VIN: 4M2EU37E07 Vehicle had numerous issues after install including hard start(like a out of time engine while cranking), stalling/poor idle, misfire after warmed up to about 160-170 degrees. Swapped coils with used engine, crank sensor and other components. No codes s... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers |
