 Prev |
Professional Automotive Repair Technical Discussions for February 3, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2000 BMW Z3 Roadster 2.5L warning light on VIN: WBACH9340Y Thanks very much for the replies. Special thanks to Dan who nailed it. Just had to do the steering angle reset. I had done that before I replaced the sensor because I saw a pretty erratic signal from it on the scan tool but didn't think to do it after repla... |
4 | |
| 2012 BMW X5 xDrive35i 3.0L Cuts out VIN: 5UXZV4C50C vehicle stalled in bay when this happened the high pressure fuel readings were not keeping up with the desired pressure from the computer and the feed pump pressure was 110 psi. we replaced the high pressure pump and sensor. car seems to be good no codes. Trouble codes: 0X629, 0X629, 0X2BE, 0X2C0. |
6 | |
| 2015 Mercedes-Benz GLK350 4Matic 3.5L smog inspection VIN: WDCGG8JB5F The customer finally got the car back to me. I cleared the stored evap code that had been in the system to allow for fresh reset of monitors. I drove the car on my long commute home with a scan tool connected. The fuel monitor still did not go ready at startup... |
5 | |
| 2004 Volkswagen Beetle GLS 1.8L Mechanical VIN: 3VWCD31Y54 Thank you everyone for your input on this vehicle, we did go in and remove the oil pan, replaced the pickup tube & seal as it was pretty gummed up, this car had seen better days as far as maintenance goes. BUT that was not the fix, it was actually the timing c... |
8 |
