
![]() |
Professional Automotive Repair Technical Discussions for December 29, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for All Makes and Models
Help Request | Answers | |
2005 Chevrolet Colorado Z85 LS 3.5L Torque Converter Bolts VIN: 1GCDT13625 So we are installing third trans. The torque comnverter bolts fron flex plate torque converter are rubbing on back of engine. We ordered new bolts from dealer, new ones are rubbing even more due to size. Have verified correct part number ordered and on par... |
View | |
2014 Ford Expedition Limited 5.4L Stall VIN: 1FMJU2A52E Got this 2014 Expedition 5.4 that runs great, no codes, no misfires, no misfires recorded in mode 6. All pertinent data pids, temp sensor, maf reading, etc good. Fuel pressure fine. Fuel pressure holds koeo. Throttle body, Mass Air Flow have been replaced ... |
View | |
2015 Subaru Forester XT 2.0L Poor Fuel Economy, Never reaches temp The VIN# is [...] and would not decode. Also the pull down boxes would not work because there was no transmission option to select. It has been id'd correctly above. We checked for codes and found none, also looked for any dislodged vacuum o... |
View |
Fixes & Summaries for All Makes and Models
Fix/Summary | Answers | |
2016 Nissan Titan XD S 5.6L Stall, Misfire, MIL Lamp on VIN: 1N6AA1F3XG Thanks Everyone for all your great suggestions. Found left front converter came apart and plugged the second converter. Replaced converters and vehicle ran much better but still rough. Found oil to be full but very thick and sludgy. Replaced oil and that a... Trouble codes: P219A, P219B, P0011 (A Camshaft Position Timing Over-Advance or System Performance Bank 1), P0021 (A Camshaft Position Timing Over-Advance or System Performance Bank 2), P0014 (B Camshaft Position Timing Over-Advance or System Performance Bank 1), P0024 (B Camshaft Position Timing Over-Advance or System Performance Bank 2). |
10 |