 Prev |
Professional Automotive Repair Technical Discussions for September 18, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2017 Kia Forte LX 2.0L Stall, MIL Lamp on VIN: 3KPFL4A73H ok guys first off thankyou to the replies that i had received.to answer some of those questions that were asked.i replaced the phasers because the intake and exhaust cam pins had elongated the locating pin holes out in the phaser itself.no brainer there.i ver... Trouble codes: P0011 (Intake cam over advanced or system performance bank 1). |
3 | |
| 2021 Kia Forte EX 2.0L Camera VIN: 3KPF24AD1M ok, what i wound up doing is going to the kia website and i input the vin and pulled up the build sheet. then went to the variant coding on my scan tool and filled in the information. thanks everyone. |
5 | |
| 2009 Nissan Altima S 2.5L Starting VIN: 1N4AL21E89 Ok thanks for the help but it was the bcm as expected I had all the inputs to start the car no codes and trace and pinned ever wire out but could never get the push to start and the brake simbol on the insument cluster. And the car would go right to run positi... |
5 | |
| 2017 Ram ProMaster 1500 3.0L Wipers Inoperative VIN: 3C6TRVAG3H The shop I am working on this for still has the vehicle. They sent the bcm they got from the dealer back and the dealer informed them they had sent them the wrong one for this van. I told them I would try a vehicle reconfig and proxy alignment when they get a... |
2 |
