 Prev |
Professional Automotive Repair Technical Discussions for September 13, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2010 Audi Q5 Prestige 3.2L MIL Lamp on VIN: WA1VKBFP4A Hi guys, I have a 2010 Audi Q5 with MIL on, car drives fine without any drivability concerns. I am using Xtool D8 to scan/diagnose this vehicle currently. The only code I retrieved so far is a P113700 (system rich). The only data I am seeing in live data i... Trouble codes: P1137 |
View | |
| 2013 Fiat 500 Pop 1.4L No Start VIN: 3C3CFFAR3D This car needed a replacement engine, we replaced it, but now the engine will not even attempt to start, no signal to the starter to crank. Two messages appear on dash: "Fuel cutoff unavailable" and "Have power steering checked". Additionally none of our 3... |
View | |
| 2004 Jeep Grand Cherokee Limited 4.7L reverse lights VIN: 1J4GW58N64 greetings to all this 2004 jeep grand cherokee laredo has no reverse lights.my testing leads me to changing solenoid pack located on valve body.looking at my solenoid pack it is the color black where the connector plugs into the dealer sent me one that is ... |
View | |
| 2006 Mercedes-Benz ML350 4Matic 3.5L MIL Lamp on Ok, I havent been on here for a while. I have this ml350 with a right bank intake timing retarded fault. The fault does not come back instantly, but after a short drive. A few months back it had a rattle noise in the chain area and intermitent cam timing c... |
View | |
| 1999 Toyota 4Runner Limited 3.4L No Start VIN: JT3HN87R7X Got this 99 [...] with a immo problem,Has code p2796 no coom with immo, Immo is engine ecm. We had a new key cut thinking the current key was the issue,now we get a mismatch key trouble code along with the no coom dtc. Checked power and grounds to ecm ,... Trouble codes: P2796 |
View | |
| 2013 Volkswagen Beetle Turbo 2.0L Hesitation VIN: 3VWVA7AT9D i been looking into this problem for couple months light comes backs on around 3,000 miles. new throttle body and connector soldier all connections, voltage drop from ecm to TB connector .01 Vehicle has new plugs and coils all bosch. Trouble codes: P0221 (Throttle/ pedal position sensor/ switch B range/ performance sporadic) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2010 Ford Mustang 4.0L smart junction box VIN: 1ZVBP8AN1A Hello, good afternoon. The mustang problem is not resolved. I think the cust removed the dome light bulbs to not be annoyed by the flashing. Replies included: ck the archives for a '08 exp that had that code and might have been fixed w a bk switch (didn't see ... |
8 | |
| 2003 Jaguar XK8 4.2L Timing chain VIN: SAJDA42C63 So... it's fixed... kind of... We purchased a new chain from Ford, and it fits exactly the same as the one we purchased from Worldpac. Apparently Ford thinks half of a tooth engagement on an actuator is enough!!! Thanks to all who responded!! |
7 | |
| 2010 Jeep Liberty Sport 3.7L engine VIN: 1J4PN2GK4A I came back last night and looked at pids again and saw that o2 heater readings were really high like 1000deg f. WOW!! I removed exhaust and blammo!! It started. So, whoever said plugged exhaust, you were right. Came into the shop this morning and saw a couple... |
13 | |
| 2017 Maserati Levante S 3.0L MIL Lamp on VIN: ZN661YUL1H Thanks for all the replies. Based on the help we received we have made a couple decisions. 1. Engine replacement jobs going forward will be billed at 1.5 times the book time labor. If we lose a job because of that, so be it. 2. Specialty cars like the one ... |
7 | |
| 2006 Volkswagen Jetta TDI 1.9L No Start VIN: 3VWCT81K96 Came to find out the customer had replaced the rear main seal. As part of this repair, the reluctor for the CKP must be removed and a new one is supplied with the new seal. The customer did not time the reluctor. Obtained a new seal and reluctor and replaced t... Trouble codes: P3007 (12295 CMP G40 No Signal Intermittent), P3008 (12296 CMP G40 Signal out of Range). |
11 |
