 Prev |
Professional Automotive Repair Technical Discussions for April 20, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for GM
| Help Request | Answers | |
| 1985 Chevrolet K5 Blazer Silverado 5.0L Steering VIN: 1G8EK18H5F This steering on this blazer does not return to center. The steering box has been replaced twice, the steering pump and hoses have been changed and all 4 ball joints, both tie rod ends, the steering stabilizer and both axle joints. I removed the drag link ... |
View | |
| 2009 GMC T7500 T7F042 7.8L park/tail/dash lights VIN: 1GDL7F1B39 i have power out of the tail lamp relay on BA09, power not getting to any of lights. next in line is splice J319. I need to know LOCATION of splice J319,and if it is a splice pack or just a regular splice in the harness. Either way, I just need the LOCATIO... |
View |
Fixes & Summaries for GM
| Fix/Summary | Answers | |
| 2005 Cadillac SRX 3.6L Class 2 data VIN: 1GYEE63745 Thanks for your input. I feel pretty stupid at this point. SP200 was hiding in plane sight wrapped in foam stuck to a brace right behind the glove box. No class2 was caused by a voltage bleed through on the class 2 wire from the ABS module to the SP200 connect... |
1 | |
| 2015 Chevrolet Tahoe LTZ 5.3L Excessive Emissions VIN: 1GNSKCKC5F ok - this was a bit my fault and should have researched it alittle longer. with testing for a high pressure fuel pump leak on these - not only must you remove the pcv from the system -tsb states to remove the dirty line from intake- but you need to also remov... Trouble codes: P0172 (Rich bank 1), P0175 (Rich bank 2). |
14 | |
| 2004 Pontiac GTO 5.7L body control mod VIN: 6G2VX12G84 Ended up just doing the HP tuner security delete. Still have security light flashing but car runs and everything still works. Thanks for the replies , if anyone has any Ideas on cutting off the light short of puling the bulb let me know . |
8 |
