 Prev |
Professional Automotive Repair Technical Discussions for April 9, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2010 Chevrolet Traverse LT 3.6L CCM for rear diff VIN: 1GNLVGED1A Need help from some GM techs. The vehicle was a no crank. He could not communicate with any modules. When my tech jumped the relay, the vehicle would run. When I arrived, I found that the CAN bus was shorted to batt voltage. When we unplugged the CCM the C... |
View | |
| 2016 Ford Escape Titanium 1.6L MIL Lamp on VIN: 1FMCU9JX1G Car is getting codes stated. They set as soon as vehicle is started. Timing chain was replaced, as well as actuators. Timing was double and triple confirmed. All the correct tools were used. Cam ring used for cam signal looked in place and was not loose on... Trouble codes: P0340 (Cam position A circuit), P0344 (Cam position A circuit intermittent), P0365 (Cam position B circuit), P0369 (Cam position B circuit intermittent) |
View | |
| 2010 Porsche Panamera S 4.8L trans will not move VIN: WP0AB2A73A car was at two other shops , both said it needed a transmission, once the car is taken out of park it will just roll no gears forward or backwards, i did scan the car and got the faults listed , i can not get a code definition for any of the codes listed... |
View | |
| 2012 Scion tC 2.5L Compressor VIN: JTKJF5C74C Hey all a/c system inop using my snap on solus edge i can turn a/c clutch relay on or of system starts to work flow control drops to 2.3 amp control reads .977. Very weird cause it has no clutch relay. Dont understand whats being triggered very confused an... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers |
