
![]() |
Professional Automotive Repair Technical Discussions for March 22, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Chrysler
Help Request | Answers | |
2012 Jeep Grand Cherokee Laredo 5.7L Cylinder deactivation VIN: 1C4RJFAT3C Thanks in advance for any and all help. Veh. came in with cyl. 4 not firing, found a roller loose on a lifter and cam lobe worn out. Replaced cam, lifter cartridges and verified they are in the correct front/rear orientation, pushrods in the correct positi... |
View | |
2013 Ram 1500 Tradesman 3.6L MIL Lamp on, limp mode VIN: 3C6JR7AGXD Hi and thank you for taking the time to look at my post. I have a Forestry vehicle here, this means that the vehicle spends about 6 hours per day in the woods and on back roads, a very tough life being beat to death. This was a company vehicle and when thi... Trouble codes: P2122 (Throttle Pedal Position Sensor/switch D circuit low) |
View |
Fixes & Summaries for Chrysler
Fix/Summary | Answers | |
2010 Jeep Liberty Limited 3.7L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1J4PN5GK1A i want to start off saying thanks for all the advice! the jeep is gone!!! so the first thing i did was a compression test and all cylinders where pretty close around 190 psi, so i did a cylinder leak down and 1 of the cylinders had a 80% leakage out of the exh... Trouble codes: P0300. |
15 |