× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for September 25, 2021
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for All Makes and Models
Help Request Answers
2012 Chevrolet Cruze LT 1.4L Poor Idle Quality VIN: 1G1PL5SC9C
Vehicle came in for rough idle after customer already replaced the valve cover thinking he had a bad PCV valve again. No change in rough idle after new parts installed. I removed the intake and cleaned the other PCV valve and inspected it. Looks ok and I d...
View
2002 Jeep Wrangler Sahara 4.0L No Start, Poor Idle Quality, Cuts out VIN: 1J4FA59S22
The vehicle is exhibiting a rough start, rough idle, then stalls out. Check engine is on for P0340. Now the vehicle just cranks and does not start. I have tested and ensured the proper power, ground, and signal is present at the sensor, and the pcm using a... Trouble codes: P0340 (No cam signal at pcm)
View
2001 Volkswagen Beetle Sport 1.8L No Start VIN: 3VWED21C91
This question does not pertain exclusively to the VW. The vehicle starts and runs for 4-5 seconds. It has a new crank sensor. The computer has been replaced with a Immo delete unit. The injectors stop firing = the car dies. Always have spark. No codes. Pro...
View
2006 Volvo S80 2.5T AWD 2.5L Hesitation, Surge, Cuts out, Stall VIN: YV1TH59286
I am wrestling with fuel pump issues. There is one thing I can't find any info on. This system is supposedly only controlled by PWM. Nowhere do I find anything about the return line. My VIDA parts does not show it. That line has a lot of pressure/flow. So ...
View

Fixes & Summaries for All Makes and Models
Fix/Summary Answers
2009 Chevrolet Impala LT 3.5L Unknown VIN: 2G1WT57KX9
Hello Group, Sorry so long getting back to you, I totally dropped the ball. The car is fixed. All the replies I got were very helpful, I even learned a few thing from this job. As I stated earlier, I only had 4 modules that would communicate with my scanner, n...
5
2002 Chrysler PT Cruiser Touring 2.4L Cuts out, Stall VIN: 3C4FY58BX2
after much more testing and getting no where and no codes and all data looks great on scanner,since it is a intermitting problem, I got customers ok to throw a pcm at it, this worked, problem fixed.customer happy, after many wiggle test and everything else I d...
5
2015 Mercedes-Benz C300 2.0L Misfire VIN: 55SWF4JB8F
Reached out to the previous shop. PCV/Oil Separator replaced, Injectors replaced and coded. Unable to correct problem. We found the engine had a severe noise coming from the front, engine oil was 2.5 qts low. Leak down test and compression test showed Cyl #1 h... Trouble codes: P2279 (Vacuum leak).
2
2012 Nissan Murano LE 3.5L Pullies VIN: JN1TANZ51A
The belt squeaking noise which persisted even after customer changed own belt and tensioner, as well as new belt and 2 idler pullies "reputable brand" changed by our shop. We were able to use a thermal imager followed by stethoscope to finally locate one of th...
8
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next