
![]() |
Professional Automotive Repair Technical Discussions for June 18, 2021 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Ford
Help Request | Answers | |
2004 Ford Explorer Sport Trac XLT 4.0L No Start VIN: 1FMZU67K14 Cannot figure out why it has low fuel pressure. Computer controlled pressure. Long crank time and sputter when cold starting. |
View | |
2004 Ford Freestar SES 3.9L MIL Lamp on VIN: 2FMZA57654 Ok so p0174 easy right?! Vehicle previously had MAF replaced by someone else. Fuel trims are always positive. BARO reading is 149hz which at a mile high is about right. A subsequent MAF was tried no change. There are no vacuum leaks, I have also disconnect... Trouble codes: P0174 (System too lean Bank 2) |
View | |
2013 Ford Fusion SE 1.6L Poor Idle Quality VIN: 3FA6P0HR6D When Idling Vehicle will Idle smooth for a minute and then idle up and down 1000 rpm down to 500 rpm, w/stalling on occasion, Took apart, checked timing (marks) with tools installed to hold cam, crank, actuator gears. everything is aligned correctly, no co... Trouble codes: P1299 (Engine Coolant Over Temp), P0016 (Crank Cam Position Correlation), P18C0 |
View |
Fixes & Summaries for Ford
Fix/Summary | Answers | |
2007 Mercury Milan 3.0L Drive Shaft VIN: 3MEHM01177 Went ahead and got a new driveshaft assembly for the car. After getting the old shaft out and looked it over I'm glad we went that way. It looks like when the shaft was assembled the joints where the carrier bearing goes is crimped in place so their would be n... |
6 |