 Prev |
Professional Automotive Repair Technical Discussions for March 20, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2009 Chrysler Aspen Limited Hybrid 5.7L No Start VIN: 1A8JW18T19 Won't go to ready status and won't start. Prior testing by another tech found that he couldn't close contactors or control fan speed in the battery pack w/scan tool. He replaced the BPCM and got fan & contactor function back, but wound up with code U011... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2010 Chrysler Sebring Touring 2.7L Misfire, MIL Lamp on VIN: 1C3CC4FD1A Well I'm very grateful to all the response given. The dealer said pcm was on national back order,and no other companies contacted could help with California emissions. I'm certain the pcm was the fix. With the corona varus and are shop shutting down. This conf... Trouble codes: P0201 (Injector control circuit), P0202 (Injector control circuit), P0203 (p0204 -), P0204 (p0205-), P0205 (p0206-), P0206. |
15 | |
| 2012 Jeep Grand Cherokee Laredo 5.7L MIL Lamp on VIN: 1C4RJFAT0C Was able to talk car lot owner into buying new dealer ecm and that fixed it. Runs like a top and no more P0335 code. So there has to be a difference in the crank reluctor signal in a 2012 and 2013. The 2012 crank signal has one large synchronized notch cut out... Trouble codes: P0335 (Crank Sensor Circuit). |
7 | |
| 2013 Jeep Grand Cherokee Laredo 3.6L monitor not running VIN: 1C4RJFAG7D Thank you so much to the 4 gentlemen that responded. Justin agreed with my suspicions. I did the drive cycles as Charles detailed -WOT accelerations and coast downs to 35mph. After doing this 6 times, the monitor displayed completed. My scanner software is up ... |
4 |
