 Prev |
Professional Automotive Repair Technical Discussions for February 8, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2007 Chrysler Sebring Limited 3.5L No Start VIN: 1C3LC66M57 One of my techs pulled the dash to replace a plugged heater core. After repairs it cranked and died. Twice more until no crank. I looked at it and found a cracked SKREEM module, the transponder antenna coil was snapped off. Ordered brand new one from deale... Trouble codes: P0513 (Invalid key) |
View | |
| 2003 Jeep Liberty Limited 3.7L Misfire, MIL Lamp on VIN: 1J4GK58K93 I've got a 2003 Jeep Liberty 3.7L where it will idle fine all day but when you accelerate it starts to count misfires on all 6 cylinders and goes into open loop. At this time you don't feel any misses. After holding the accelerator for another 15-20 second... Trouble codes: P0300 (Multiple cylinder misfire) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2006 Chrysler Pacifica Touring 3.5L Engine VIN: 2A4GM684X6 The ?Cats? have it! Doing a backpressure test at the S1 O2 I was getting 1.5 PSI until I hit the magic 3000 RPM and it shot to 4PSI. Testing at the S2 O2 there was sub 1PSI across the board. Good call. Great learning experience. Thanks all! |
5 | |
| 2011 Chrysler Town & Country Touring L 3.6L Surge, Misfire, MIL Lamp on VIN: 2A4RR8DG1B I pulled the back valve cover and inspected the cams,springs,lifters and rocker arms.I didn't see any obvious problem so I replaced the exhaust cam phaser and the problem is fixed.Not too bad a job once you have the valve cover off.I was able to use a 3/8 ext... Trouble codes: P000B, P0016, P0300. |
6 |
