 Prev |
Professional Automotive Repair Technical Discussions for February 5, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 1994 BMW 850Ci 5.0L wiper motor VIN: WBAEG21080 Customer purchased the vehicle in Spain to re-sell in Denmark , my problem is that i cannot find any European wiring diagrams (wiring does not match the available diagrams) I get no action from the relays , but the washer works . I cannot activate then wip... |
View | |
| 1999 Mercedes-Benz E300 3.0L Cuts out VIN: WDBJF25H7X This car came in with dying out after driving for 15 minutes and would alway restart and continue to drive. We had replaced crank sensor seemed ok on first test drive but second test drive died out and was able to get car back to shop. Saw some aire in cle... |
View | |
| 2013 Mercedes-Benz Sprinter 2500 3.0L NOX sensors inactive VIN: WD3PE7CC7D Truck came in with 10 starts remaining, check engine and DEF MILs illuminated. Codes in CDI Module: Current DTC P18BC00 Emission limit for NOX concentration has been exceeded (Adblue quality is too low) There is a signal above the permissible limit value. ... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2005 Mercedes-Benz E320 CDI 3.2L MIL Lamp on, Low power VIN: WDBUF26J55 The problem was air being sucked in past a deformed seal ring at top of water sensor in fuel filter. I was testing fuel volume at the outlet of the filter and noticed (I should say re-noticed..) slight fuel seepage at top of filter, which I had not connected ... Trouble codes: P2047 (001-). |
8 |
