 Prev |
Professional Automotive Repair Technical Discussions for September 17, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2008 Hyundai Elantra GLS 2.0L No Start Guys, have a 08 Elantra in the shop now, towed in for no start had new cam and crank sensors installed and new pcm before it hit us, no spark and no injector pulse. found a old post about unplugging the cam sensor to get it started and it worked, my questi... |
View | |
| 2006 Subaru B9 Tribeca Limited 3.0L No Start VIN: 4S4WX85C86 Any help or pointers on this would be greatly appreciated! I've been working on this for a week now before I decided that I would bother my fellow IATN techs for help. I'm lost on this Subaru! The car came to us as a trade-in towards another car with P0... Trouble codes: P1571 (Reference Code Incompatibility) |
View | |
| 2007 Subaru B9 Tribeca Limited 3.0L engine VIN: 4S4WX86D67 this car has been her for several weeks at this point. towed in for intermittent stall and no restart. vehicle starts and runs fine for approx. 5 minutes before dying. stall is very sudden, no stumbling or skipping or hesitation just dies as if key is cut ... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2005 Honda Accord LX 2.4L MIL Lamp on VIN: 1HGCM564X5 Only thing I found was when I went to pull the upstream sensor to inspect it for contamination, it was hardly snug. It looked like someone replaced the rack after I originally replaced the rear O2 and so I'm figuring that they pulled the sensor for easier remo... Trouble codes: P0139 (Secondary heated O2 sensor slow response B1S2). |
9 | |
| 2005 Toyota Tundra Limited 4.7L master VIN: 5TBDT48165 after multiple times bleeding yesterday with the same proceedure that Grant described, we had success this morning. yes the engine was running, we opened a rear wheel cylinder while bleeding the 3rd chamber. thank you for your time |
9 |
