 Prev |
Professional Automotive Repair Technical Discussions for August 23, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 1997 Chrysler LHS 3.5L Misfire, Misfire VIN: 2C3HC56F3V this vehicle has misfires that come and go on 2,4,6 and temp reading goes to -40 fuel trim to 100% . valve job has been done on cylinder heads new spark plugs, wires, coil, computer, timing belt. will run fine for a day then act up. any suggestions? Trouble codes: P0300 (p0300-), P0300 (p0300-), P0300 (p0300-), P0300 (p0300-) |
View | |
| 2015 Chrysler 200 Limited 2.4L transmission VIN: 1C3CCCABXF ok replaced tranny in this car now I am at a loss on how to program it,shifter only lights up in p and l evidently is gonna need prox alignment have done them before on darts but my autel elite is not doing it,any suggestions other than Chrysler,not famili... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2009 Dodge Avenger SXT 2.4L Misfire, MIL Lamp on VIN: 1B3LC56BX9 Yes it is fixed. I went with the posts concerning a re-flash. Steve hit the nail on the head. I drove the thundering 2 cylinder powerhouse to the sharp motor company dealer. they all chuckled at me but i left it with a s.o. to re-flash. it worked out fine and ... Trouble codes: P0300, P0301, P0335, P0315. |
6 | |
| 2006 Jeep Liberty Sport 2.8L MIL Lamp on VIN: 1J4GL48566 The inlet pressure sensor was not showing anything on the scan tool and it had been zip tied to the connector because the retaining lock was broken off. If I squeezed them together I did get a good reading. Replaced the connector and P1186 never came back. A C... Trouble codes: P1186 (inlet pressure sensor circuit), P0299 (turbo underboost). |
6 |
