 Prev |
Professional Automotive Repair Technical Discussions for August 20, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2011 Chrysler Town & Country Touring L 3.6L left and right turn signals VIN: 2A4RR5DG2B Good afternoon fellow techs, I have a customer who brought his car into shop with inoperative turn signals in the front - as well as no rear brake lights. Replaced the brake stop switch and now brake lights function; however, we inspected the turn signal... |
View | |
| 2013 Chrysler 300 3.6L Compressor clutch VIN: 2C3CCAAG1D Customer complaint: a/c will quit blowing cold intermittently & will not work sometimes shortly after started. This is a ATC Automatic Climate Control system. Scanned codes in HVAC system, none found. Yellow indicators are working on all control buttons wh... |
View | |
| 2005 Dodge Ram 1500 ST 5.7L Excessive Emissions, Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire, Poor Fuel Economy, MIL Lamp on VIN: 1D7HA18D65 So, As mentioned heads both were removed and sent to machine shop. I replaced the head gasket and put everything back together. While test drive got a p0300 random misfire. I reused the original plugs as the customer said he replaced them shortly before th... Trouble codes: P0172 |
View | |
| 2014 Ram 2500 Tradesman 6.4L pcm control VIN: 3C6MR5AJ6E I need to know if anyone has replaced the complete wire loom coming from pc to engine and transmission, need aprox time if possible and if there are any other items that I should have on hand. I appreciate any and all help Thanks Jake [...] |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Dodge Ram 1500 ST 4.7L Poor Idle Quality, Cuts out, Stall VIN: 1D7HA18N62 Vehicle had jumped 1 tooth of cam timing during initial startup on bank 2. scan tool showed cam/crank correlation OK but oscilloscope showed patterns didn't match up. thank you to those who replied! Trouble codes: P0352, P0353, P0357, P0356. |
5 |
