× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 7, 2019
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for All Makes and Models
Help Request Answers
2006 Chrysler PT Cruiser Limited 2.4L Electronic VIN: 3A8FY68866
This car starts runs and drives perfectly. Upon the second startup it immediately stores codes for the transmission. The following are the codes. p0218 transmission high temperature activated. p0718 transmission sensor 1 intermittent. po613 Internal transm...
View
2007 Lexus SC430 4.3L A/C compressor VIN: JTHFN45Y17
Need some Lexus experience here! Customer states A/C inop. Found compressor not turning on. Evac and recharge-no change. Check for A/C faults, none present. Jump ground to pin 1, control side of compressor relay and compressor turns on, A/C blows cold. Fou...
View
2010 Lincoln MKX 3.5L Evaporator core VIN: 2LMDJ6JC7A
After evaporator core replacement the driver's side air is uncooled but not heated. Low side freezes, pressures low: 150 high side and 20 low side. Added 5 oz. more R134a. High side 260 low side 25 and still freezes. After resting the system, the a/c works...
View

Fixes & Summaries for All Makes and Models
Fix/Summary Answers
2005 BMW X5 3.0i 3.0L Transmission
Well, thanks to Alan [...] for the diagram, which contained all the information that I needed to diagnose the issue. The AGS module has failed. It should supply voltage KOEO/KOER, to the switches internal to the transmission, and it is dead. All the oth...
5
1978 Toyota Land Cruiser 4.2L No Start VIN: FJ40258078
Thanks to everyone who replied. I put a condenser on and engine started and ran good. I then installed a ballast resistor. The engine is running good and charging system is working normal at this time.
17
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next