 Prev |
Professional Automotive Repair Technical Discussions for June 25, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2014 Dodge Durango SXT 3.6L temperature VIN: 1C4RDJAG2E This suv came to me from car lot-temp goes up passed the white normal mark but never overheats-on scan tool temp reads to 232-244 cruising. 2 thermostats replaced -only thing i have not done is pull water pump off We vacuum filled the system also when it d... |
View | |
| 2005 Jeep Grand Cherokee Limited 4.7L MIL Lamp on VIN: 1J8HS58N45 All four O2 sensor heater circuits flagged a code at the same time. But the MIL has been on for the last year with an EGR code the cust declined to fix. The MIL comes on immediately after the codes are erased. Checked resistance to ground and V drop in com... Trouble codes: P0031 (O2 sensor 1/1 heater circuit low), P0057 (2/2 same), P0037 (1/2 same), P0051 (2/1 same) |
View | |
| 2017 Jeep Cherokee Sport 2.4L proxi align VIN: 1C4PJLAB0H vehicle came from auction. vehicle cam in and had electronic steering angle sensor code and performed relearn all is good code gone. keeps setting code b2204:55 in BCM. performed proxi relearn with autel maxisys. and says all modules learned and not requir... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2012 Ram 1500 ST 5.7L engine VIN: 1C6RD6FT5C Thank you for all the replies. The problem was I wasn't getting the push rods seated into the lifters right. After I put the lifters in I watched the push rod and the valves open and close while cranking the engine over with the starter. When I would put it al... |
7 |
