 Prev |
Professional Automotive Repair Technical Discussions for June 11, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2013 Chrysler 300 3.6L No Start VIN: 2C3CCAAG2D Greetings every body and thanks for your help. I was called to help to find the problem in this Chrysler 2013 with 244618 miles (a taxi) on the odometer with a 3.6L. engine. It does not start. No fuel pressure in the system. They have installed a new fuel ... |
View | |
| 1997 Jeep Grand Cherokee Limited 4.0L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1J4GZ78S0V This jeep is well cared for. Plugs done last year. Just recently has problem with rough idle after stopping for traffic on highway and idling, lean code sets, no misfire codes. Customer requested cap, rotor and wires. Problem with there before cap, rotor a... Trouble codes: P0171 (engine lean) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2014 Jeep Cherokee Limited 3.2L Fuel gauge VIN: 1C4PJMDS7E The fix was replacing the LH(secondary) fuel level sending unit. The resistance too low. Resistance reading on "BOTH" senders should be the same. 980 oms full and 51 ohms empty. On the original LH sender I had 190 ohms full and 42 ohms empty. There were no dea... |
8 | |
| 2011 Ram 1500 ST 3.7L Poor Idle Quality, Poor Idle Quality, Poor Idle Quality, Poor Idle Quality VIN: 3D7JB1EK0B Thanks to everyone for all the helpful information. Performed a compression test and cylinder #5 had no compression. Removed the heads and sure enough the valve seat dropped on the exhaust valve, causing the valve to bind. The heads have been reworked and ... Trouble codes: P0300. |
11 |
