 Prev |
Professional Automotive Repair Technical Discussions for May 11, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2008 BMW 535xi 3.0L Fan VIN: WBANV93598 Car came in with coolant leak we replace electric pump and electric fan from dealer . and as soon as car it's turn on fan kicks in high speed . check wiring continunity check fine. Coolant sensor was correded decided to replace it also since its not expens... |
View | |
| 1994 Mercedes-Benz SL320 3.2L Warning light abs and ets VIN: WDB1290632 Help needed thanks ahead of time. 1994 w129 merc sl320 [...] ABS and ETS lamps on dash all the time. We replaced throttle body which was faulty. Deleted error codes in engine,egas(cruise).ABS/ETS lamps always on. NO ERROR CODES SAVED ANYWHERE. ... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2012 Audi A8 Quattro L 4.2L downshift VIN: WAURVAFD1C I apologize for the delay of this summary: The trans cooler valve is not where Mitchell shows it, but rather on forward top of trans. It did have coolant damaged terminals but this did not correct shifting, nor did trans svc & performing adaptions. There are n... Trouble codes: 10333 (P19A 200 Thermostat for trans Open Circuit), 10336 (P19A 100 Thermostat for trans Short to ground). |
5 | |
| 1997 Ford Ranger XLT 2.3L Misfire VIN: 1FTCR10A1V Sorry it took so long to close this request, the owners decided not to pursue this any longer and the customer just came and picked it up a day ago. I never did get it to run right, however I got rid of the misfire and the P0303 did not come back. But it still... Trouble codes: P0303 (Misfire 3cyl). |
29 | |
| 2003 Mercedes-Benz ML350 3.7L ignition switch VIN: 4JGAB57E83 switch is out...it was just plain old stuck in there.it seems to have swollen over the years.I did have the plastic tabs bent back but it did not budge.I was afraid that there was a setscrew that I did not see and that I could do damage by yanking too hard.b... |
4 |
