 Prev |
Professional Automotive Repair Technical Discussions for April 25, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2002 Ford F-550 Super Duty XL 7.3L High Pressure Oil VIN: 1FDAF57F82 Thank you for all for taking the time to read and respond with ideas and suggestions. It turns out the 2 reman high pressure oil pumps we had replaced were faulty. They could make max pressure when dead headed but they could not supply enough volume under hig... |
10 | |
| 2004 Ford F-350 Super Duty Harley-Davidson Edition 6.0L Poor Idle Quality VIN: 1FTSW31P74 Thank you to all that replied with more diagnostic paths, unfortunately replaced the FICM, also the injectors again and re tested compression only to find the same issues happening again and again. It was always intermittent and would come and go, it seemed to... |
10 | |
| 2008 Ford F-250 Super Duty XLT 6.4L Ball joints VIN: 1FTSW21RX8 HELLO GUYS! I ENDED UP USING THE MOOG JOINTS. I ACTUALLY CALLED MOOG AND TALKED TO THEIR TECH LINE ON THE PERCEIVED BAD RUMORS ABOUT THEIR BALL JOINTS AND THEY WERE VERY OPEN TO THE CONVERSATION. BOTTOM LINE IS THAT YOU HAVE TO FOLLOW THEIR DIRECTIONS FOR A... |
23 | |
| 2013 Ford F-150 FX4 3.5L instrument cluster VIN: 1FTFW1ET6D Thanks to those who responded. I did not find any obvious problem and decided to do what you suggested and did not replace anything and customer is going to wait until ford gets the correct calibration. |
4 |
