 Prev |
Professional Automotive Repair Technical Discussions for April 16, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2005 Dodge Ram 2500 Laramie 5.9L fuel pump, cooling fan VIN: 3D7KS28C45 Codes P0483 and P0628, in looking at P0628, I've checked voltage at org/rd wire at fuel pump, no voltage after key cycled. Trace to TIPM, org/rd wire connector C6 terminal #7 to fuel pump, I have no voltage here after key is cycled. Upon removing connector... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2003 Chrysler Town & Country LX 3.8L Poor Idle Quality, MIL Lamp on VIN: 2C4GP44L53 The problem was a broken exhaust valve spring on no. 1 cylinder. What threw me off was that there were no misfire codes and the first time I performed the compression test for whatever reason all cylinders tested good. After I had exhausted all possibilities... Trouble codes: P1297. |
14 | |
| 2006 Dodge Ram 1500 ST 4.7L Stall, Loss of throttle VIN: 1D7HA18N56 THIS ONE IS FIXED. HAD INSTALLED BOSCH UPSTREAM OXYGEN SENSORS WHICH TO MY KNOWLEDGE WERE THE FACTORY REPLACEMENTS. AFTER THREE DIFFERENT SENSORS IN THE ONE BANK SWITCHED TO A DENSO SENSOR. NO ISSUES. TRUCK NO RUNS AND DRIVES WITHOUT ISSUE. CLOSED LOOP FUELING... Trouble codes: P1128 (Bank 1 no closed loop), P1129 (Bank 2 no closed loop), P0300 (Multi cylinder misfire), P0141 (O2 heater circuit bank 1 sensor 2). |
6 |
