
![]() |
Professional Automotive Repair Technical Discussions for March 23, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for European
Help Request | Answers |
Fixes & Summaries for European
Fix/Summary | Answers | |
2012 Audi R8 5.2L Brake Lights VIN: WUAENAFG2C We ended up sending this down to Audi, It was found that the brake switch plausibility output from the Bank 1 ECU to the TCU was not reporting properly, the bank 1 and bank 2 engine control units are identical except for programming and coding and the bank 2 E... |
3 | |
2012 BMW X5 xDrive35i 3.0L No start, Multiple faults VIN: 5UXZV4C51C Since all modules in PT-CAN are down... 1. Scoped PT-CAN and compare to reference, Voltage is at 1.79v and reference voltage is at 2.4v. (best place to back probe is DME) 2. Tested Terminal Resistors by check PT CAN high and low and reads at 60 ohms (good r... |
10 | |
2007 Volkswagen Jetta Wolfsburg Edition 2.5L brake booster VIN: 3VWEF71K97 WOW, Where did the time go! Sorry for the late response. We had some recommendations but nothing very specific especially about the readings. Some suggested old or contaminated fluid,a bad check valve, pivot binding and possibly a vacuum pump,(it is not equipt... |
8 |