 Prev |
Professional Automotive Repair Technical Discussions for December 3, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2005 Lexus GX470 4.7L Mechanical VIN: JTJBT20X65 Has anyone encounter this problem? low on oil warning light come on and off.if you increase idle speed to 1000, low on oil warning light stay off. Remove oil pressure switch and no oil coming out. Install oil pressure gauge and it read zero. Replace oil fi... |
View | |
| 2004 Toyota Sienna LE 3.3L 2-3 shift VIN: 5TDBA23C54 car came in having this 2-3 issue consistently, rebuild trans with complete kit, valve body, converter. had same issue but intermittently. have had the trans back out 3-4 times since initial time and dont see anything wrong, all air checks on bench seem fi... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2013 Kia Soul ! 2.0L heat and ac control not working VIN: KNDJT2A69D customer has not come back. but when i find out i will update Thank you for the help |
4 | |
| 2008 Lexus RX400h 3.3L Battery VIN: JTJHW31U38 According to the responders, the draw is considered normal. I generally don't like to see them this high, and some of the posts in the archives echoed my thoughts, hence this "help request" was started. Three other things conspiring against the client would ... |
10 | |
| 2008 Nissan Sentra SL 2.0L 1-2 shits VIN: 3N1AB61E08 Thanks to all that helped me on this problem. I ended up replacing the TCM plug jack with one from a salavage yard . The connection pins were not signaling state to the ECM . Just spliced in and plugged it up. and all is well. |
6 | |
| 2002 Toyota Camry LE 3.0L Hesitation VIN: 4T1BF32K42 so this car is fixed.after ohms testing the wires from the knock to the ecu,all was good so i replaced the 2 knock sensors and a new dealer harness.i did use aft sensors.this car just wasn't worth the gamble.so I removed the plentum and intake,only to find not... Trouble codes: P0325, P0325. |
12 |
