 Prev |
Professional Automotive Repair Technical Discussions for August 16, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2014 Ford Focus SE 2.0L Shift Fork B VIN: 1FADP3F22E Hello all. I have a 2014 Ford Focus with the 6 speed dual clutch auto trans. This vehicle was towed in for a no crank issue. Guy said his daughter drove it to work, everything was fine, went to leave no starter operation. I told the guy, "piece of cake, pr... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2000 Ford E-350 Econoline Club Wagon Custom 7.3L No Start VIN: 1FTSS34F8Y I ended up calling a friend who had a 7.3 same year and tried his IDM and van started right up. But a new reman from ford and starts everytime. |
10 | |
| 2006 Ford F-150 XLT 4.2L MIL Lamp fuel trims VIN: 1FTRF12206 The fix was a new H02B1S1 motorcraft wiring connector pigtail (chassis side- connector C171) with new overlay to pcm connector C175E ( housed three of the four pins to H02B1s1) and H02B1s1 pin 2 to pin 16 (rd/yl) @ the 16 way connector (C139) which is about 4 ... Trouble codes: P0171 (bank 1 sensor 1 lean), P2195 (02 bank 1 sensor 1 biased lean). |
22 | |
| 2011 Ford Taurus Limited 3.5L ac system VIN: 1FAHP2FW0B Thanks to all that replied.Fix turned out to be a partially plugged high side line from drier to evap.At some time before we got veh. a dryer had come apart and dessicant balls were lodged in a sharp bend in line.You could blow through it with shop air but not... |
16 | |
| 2014 Ford Focus SE 2.0L MIL Lamp on, MIL Lamp on THE PROBLEM WAS IN THE BANK 1 O2 SENSOR HARNESS CONNECTOR NO OTSIDE VISABLE PROBLEM BUT WITH CONNECTOR TAKEN APART THERE WAS ONLY 2 STRANDS OF WIRE IN THE CRIMP FOR THE WIRE THE PCM MONITORS FOR THIS CODE ...INSTALLED OE CONNECTOR . Trouble codes: P2626 (Bank 1 sensor [...] trim circuit open). |
7 |
