 Prev |
Professional Automotive Repair Technical Discussions for August 14, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2005 Jeep Liberty Limited 2.8L Timing Belt VIN: 1J4GL585X5 This Jeep came in overheating with Combustion Gases present in the cooling system. Removed head and found it was cracked and not repairable. Got a new head from Mopar and started going back together, get the timing belt on and try to rotate crankshaft with... |
View | |
| 2012 Jeep Liberty Sport 3.7L sunroof VIN: 1C4PJMAK9C Being as Jeep no longer sells the sunroof module, we had to replace it with a used one. Now the only code is for a vin mismatch. The roof will not operate even though all the switches operate as seen through the scanner, We took it to Jeep and they said th... |
View | |
| 2013 Jeep Patriot Sport 2.4L no power VIN: 1C4NJRBB0D It has a new coil on #3, no codes, fuel press and compression good. here is the kicker. on scanner base timing is -48 degrees, exhaust cam is 121.7 degrees actual and 121.3 desired. Intake cam is 119.7 actual and 120.1 desired at idle. Correct me if i am w... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2000 Dodge Intrepid 2.7L MIL Lamp on VIN: 2B3HD46R2Y thanks to all who responded...an OEM egr did the trick...new one came with a restrictor plate attached...hmmmmm? Trouble codes: P0405 (Egr system low voltage). |
9 | |
| 2004 Dodge Caravan SE 2.4L Shift Solonoids VIN: 1D4GP25B14 Ok, here is what we found.The solenoid pack had an open circuit on the 2-4 solenoid that started as a short which took out the trans relay power supply driver {PCM}and fried the ground in the TIPM. We replaced the solenoid assembly,the pcm and ran an external ... |
3 | |
| 2007 Jeep Wrangler X 3.8L MIL Lamp on VIN: 1J4FA24157 Thanks for the replies. The issue was resolved by replacing the after market flywheel with an OEM unit. I am quickly turning towards becoming a shop that insists on only using OEM parts. Trouble codes: P0300. |
8 |
