
P0443 Diagnostic Trouble Code Discussion for July 2018
EVAP Purge Solenoid Circuit Malfunction
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0443
Help Request | Posted | |
2008 Ford E-350 Super Duty 6.8L MIL Lamp on P0443: Evap System Purge Control Valve Fault. Tested both Pin 1 at front 02s plug with ignition on 12.00V (battery volt) (Bank 2S1) Tested with test light with ignition on pin1 (ignition 12v+) and pin2 heater (PCM) test light lighted (on) (Bank 1S1) Tested with test light same as above no light ... |
July 05, 2018 | |
2008 Ford E-350 Super Duty 6.8L MIL Lamp on P0443: Evap System Purge Control Valve Fault. Tested both Pin 1 at front 02s plug with ignition on 12.00V (battery volt) (Bank 2S1) Tested with test light with ignition on pin1 (ignition 12v+) and pin2 heater (PCM) test light lighted (on) (Bank 1S1) Tested with test light same as above no light ... |
July 08, 2018 | |
2005 Jeep Wrangler SE 2.4L MIL Lamp on VIN: 1J4FA29125 P0443: EVAP Purge Solenoid Circuit Malfunction. After changing the PCM for the 2nd time i wanted to know why the PCM was blowing. I checked the ground wires and power supply and didn't find anything. I looked at all the output control for shorts or excessive current with no problems. also with the key o... |
July 16, 2018 |