 Prev |
Professional Automotive Repair Technical Discussions for March 27, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2003 Ford E-150 4.2L Coolant temp gauge VIN: 1FTRE14213 Hello Friend, Having issue with the coolant temp gauge on this van no working. I have jump connector at temp sender the gauge will rise to full hot. Replaced temp sender twice, one after market and one OE, still have same issue. Ohmed red/wht from send... |
View | |
| 2009 Ford F-150 STX 4.6L Check Engine Light VIN: 1FTRX14W59 Hello all, I've checked the resistance of the EVR, voltage supply in to the EVR, the wire between terminals 1 at the EGR and terminal 21 at the PCM for short to power or ground. The only odd thing I had was 2v on the EVR wire when it was unplugged from ... Trouble codes: P0403 (EGR Control Circuit) |
View | |
| 2016 Ford Explorer XLT 3.5L Stall VIN: 1FM5K8D88G I am the 4th tech to look at this. Will stall when they stop at end of drive to get mail and will restart ok, wrench light comes on,if they don't stop it won't stall and usually ok for the rest of the day. Never had any PCM codes. The last tech could not d... Trouble codes: U0100 (PSCM PAM ABS lost communication w/PCM), U0401 (PSCM PAM invalid data from PCM) |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2009 Ford F-450 Super Duty XL 6.4L MIL Lamp on, no power VIN: 1FDAX47R39 I,ll address the codes first a(1) new crank sensor took care of the p1336 and had no effect on the performance,(2)p132b does not request the mil,but pointed in the correct direction.running koeo on demand set no problems,koer on demand only set a p1703 brake p... Trouble codes: P1336, P132B. |
9 | |
| 2007 Mercury Mountaineer 4.0L engine VIN: 4M2EU47E77 I ran a dynamic or engine running compression test, but since it is drive by wire, the computer would not let me snap the throttle as fast or as many rpm as I would like. I guess the fact that it is hard misfiring causes this. Because both the good and bad c... |
8 |
