
![]() |
Professional Automotive Repair Technical Discussions for January 4, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Asian
Help Request | Answers | |
2006 Honda Civic EX 1.8L Immobilizer VIN: 1HGFA16836 Customer originally took car to Honda dealer for a no-start condition. It would start and die, green security key was flashing. Dealer diagnosed it as a bad immobilizer and recommend to replace everything(ECM, immobilizer, MICU, etc.) Customer didn't want ... |
View | |
2004 Nissan Altima S 2.5L No Start VIN: 1N4AL11DX4 Car won't start in cold temps. Currently temps in Chicago suburbs close to 0F. When temps get above 30F or so, usually starts. If car won't start outside, a few minutes in a 60F shop and it runs. It does not need to sit long inside. If act I have to leave ca... Trouble codes: P0340 (CMP Sensor Problem) |
View |
Fixes & Summaries for Asian
Fix/Summary | Answers | |
2003 Nissan 350Z Track 3.5L battery VIN: JN1AZ34D03 Based on good feedback from members in the iATN community, I traced the alternator and starter wires and found out that the previous owner had connected a woofer speaker to a fusable link wire connected to the battery. This wire was shorting out and causing th... |
14 | |
2006 Toyota Corolla S 1.8L MIL Lamp on VIN: 2T1BR32E56 Knock sensor was bad new sensor read 200k ohms. Original sensor tested on the bench resistance was all over the place and actually would change with swapping meter leads. BEWARE Alldata pcm pin out info is totally wrong for knock sensor!!! Correct pin out foun... Trouble codes: P0327 (Knock sensor). |
9 |