
![]() |
Professional Automotive Repair Technical Discussions for December 6, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Ford
Help Request | Answers | |
2000 Ford F-250 Super Duty Lariat 7.3L Rear Main VIN: 1FTNW21F3Y First off Thank You for taking time to look at this request. Customer brought vehicle in with a slipping clutch and serious oil leak down the right side of the Bell Housing. We replaced the flywheel, clutch kit and rear main seal. Started vehicle and still... |
View | |
2003 Ford Taurus LX 3.0L Stall VIN: 1FAFP55U53 I am at a lost... vehicle will run great for days and then after starting and accelerating for a few feet it asks as if it dies, the one time I was aware enough to look the low fuel and ABS light were the only 2 lights that came on, but just as fast as it ... |
View | |
2012 Ford F-450 Super Duty XL 6.7L No Start, Stall VIN: 1FDUF4GT1C this tow truck was towed in last week. The owner had removed CAC hose and air cleaner & intake hose. Scanned for codes and engine control data with IDS. Had codes for MAF IAT1, and G/P control module comm. Cleaned GPCM connectors, pluged in maf and reteste... |
View |
Fixes & Summaries for Ford
Fix/Summary | Answers | |
2004 Ford F-150 Lariat 5.4L Poor Idle Quality, Misfire VIN: 1FTRX12524 Thanks to all for your help. The oil pressure was 30 psi hot at idle. Referred customer to the dealer for further diagnosis. I have not heard anything from him. Trouble codes: P1336 (CKP crank position and/or CMP cam position input signal to PCM concerns.). |
8 | |
2007 Ford Explorer Sport Trac Limited 4.6L MIL Lamp on VIN: 1FMEU53887 Thanks to all that replied. I was looking to verify what I thought was wrong and your replies helped. Motor gears sounded stripped even though arms moved freely. also took the suggestion to clean out the gunk as a precaution. Thanks again,Jim [...] Trouble codes: P2004, P2005. |
4 |