
![]() |
Professional Automotive Repair Technical Discussions for December 4, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for European
Help Request | Answers | |
2012 Audi S4 3.0L mounts VIN: WAUDGAFL4C Hi everybody. I have vibration problem with this S4.I does it at idle (700 rpm). If I increase idle to 1200rpm it gets much better, not perfect. You can't feel it on the chassis, only on the body (fender, doors and seat). I installed all the mounts with go... |
View | |
2008 BMW 335i 3.0L whistling VIN: WBAVB73598 Car dropped off with a whistling noise. Pulled codes no codes in system. Checked pcv system checked o.k. Smoke test engine can not see any leaks. The only time i can get it to do it is under acceleration at about 1500 rpm.Noise sounds like pvc system. Remo... |
View | |
2008 Volkswagen Touareg 3.6L Misfire VIN: WVGBE77L48 Help...doing a smoke test in the morning looking for vacuum leak and then will be doing a upper engine clean in the morning but could use all the help i can get...thank you Trouble codes: P0300 (Random misfire), P0303 (Clyinder 3 misfire) |
View |
Fixes & Summaries for European
Fix/Summary | Answers | |
1998 Jaguar XJ8 4.0L No Start VIN: SAJKX6249W Thanks everyone once again for the leads. After hours of tests I was looking at the firewall bulkhead connector and out of the corner of my eye, way, way, down low just above the bell housing there was an electrical connector disconnected That was my problem. ... Trouble codes: U1135 (Ignition status not obtained). |
7 |