 Prev |
Professional Automotive Repair Technical Discussions for October 9, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2004 Chrysler Sebring Limited 2.7L Pcm VIN: 1C3EL65R14 Vehicle arrives as no crank, with no bus in cluster. Battery tests ok, can jump relay and crank engine.No communication with pcm. Snip 5 and 8 volt feeds and have nothing coming from pcm . I believe the pcm is bad, but unsure if ive missed something, or have m... |
View | |
| 2012 Dodge Grand Caravan Crew 3.6L Drive VIN: 2C4RDGDG2C We sent trans to reliable builder a few months ago. Customer returned with a loss of prime in the mourning and a engine stall. Trans will not drive until fluid pressure build up. Has any one else had this and dose any one know where the drain back valve for th... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1998 Dodge Ram 2500 8.0L Oil pressure VIN: 1B7KF23W9W After reading all the replies we pulled the pan & checked the screen. Everything looked really clean, put back together and still had the problem. After reading a lot of posts I found someone talking about priming the pump through the relief spring opening. ... |
8 | |
| 2001 Dodge Ram 1500 Van 5.2L Poor Idle Quality, Cuts out, Stall, MIL Lamp on VIN: 3B7HC13Y71 Thanks guys for all the help. I advised the customer about spending time with the lab scope and trying to prove which sensor was bad but he wanted to try a new distributor and spark plugs first after they were installed and timing set the truck did the same th... Trouble codes: P1391 (intermittent loss of cam or crank signal). |
12 | |
| 2012 Jeep Wrangler Unlimited Rubicon 3.6L Starting VIN: 1C4HJWFG0C Thank you every one that took time in assisting me with this problem. Happy to say this looks like a fix ,after cleaning the Battery post for a second time and doing a hard reset looks like the problem is solved. But time will tell its only been 10 days or so ... |
10 |
