 Prev |
Professional Automotive Repair Technical Discussions for October 5, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1997 Ford Escort LX 2.0L Clutch VIN: 3FALP15P7V I am attempting to remove the transmission in order to replace the clutch. I haven't replaced a clutch on this particular model before. I think I've removed everything necessary but I can not get enough clearance to completely pull the transmission off of the ... |
View | |
| 2008 Ford F-450 Super Duty XL 6.4L No Start VIN: 1FDXW47R28 I have an intermittent no start but cranks over. Replaced both fuel filters and the primary filter on the frame rail was very plugged. Replaced the fuel rail pressure sensor. Electric low pressure pump works fine. Seems to not start when hot more than cold sta... Trouble codes: P120F, P2291 (Injector control low pressure cranking) |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1998 Ford E-150 Econoline 4.2L No Start VIN: 1FTRE1429W The Van is fixed. Thank you for the excellent advice. When the EEC relay (PCM relay)does not turn on there is no power on the at the "vpwr" circuit (pin 97 at PCM). When this happens the check engine light does not turn on and the engine cranks with out sta... |
14 | |
| 2014 Ford Escape S 2.5L Starting VIN: 1FMCU0F79E Thanks to all who replied. I disconnected alternator and let sit over night and the batt still died. I used a shunt to test for draw result was the same about 10mA.I found a tech bulletin on dead batt. Updated hvac software and all is good. |
16 |
