 Prev |
Professional Automotive Repair Technical Discussions for June 16, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2013 Mazda 3 i 2.0L engine noise VIN: JM1BL1L79D First let me thank everyone for their help. On test drive the noise is the loudest on acceleration between 2500 to 3800 rpm, but you can hear it when letting off the gas a little. At idle there is no noise, but you can increase the rpm over 2500 and the noise ... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2000 Mazda MPV DX 2.5L Engine VIN: JM3LW28G0Y Hey guys, after searching here on IATN as well. I found one solution that required getting a non antitheft PCM and then moving pin #104 to #80. After that, the car started right up. I had to reprogram VIN into PCM since the ABS light turned on and had DTC VIN ... |
7 | |
| 2006 Nissan Pathfinder SE 4.0L Driveability VIN: 5N1AR18U06 The transmission shop rebuilt the transmission, replaced the TCM/control assembly and installed a front mounted trans cooler instead of using the one in the radiator. Vehicle has been driven for 3 days so far and everything is perfect. |
9 | |
| 2012 Suzuki Kizashi SE 2.4L Shifting VIN: JS2RF9A37C SENT VEHICLE TO TRANS SHOP. WAITING ON THEIR FINDINGS. IVE TESTED ALL CURCUITS AND FOUND VALVE BODY ELECTONICS BAD. |
4 | |
| 2009 Toyota Matrix XRS 2.4L Misfire VIN: 2T1GE40E09 After getting all these parts off to get to the head bolts, i checked the bolts and luckily, all were tight. bolts seem to have been tight. after removing the head, found the head gasket blown between 2 & 3 cylinders. sent head out for resurfacing and regri... |
9 |
