 Prev |
Professional Automotive Repair Technical Discussions for February 14, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2006 Mitsubishi Montero Limited 3.8L No Start, hard start VIN: JAMW51S963 We have a Montero with a intermittent cold start issue. When the issue does occur you can hold the throttle down and get the car to start. It will then start and run for a random amount of time with no issues.It was originally towed to us and once we got it to... |
View | |
| 2007 Subaru Forester X 2.5L oil system VIN: JF1SG656X7 Afternoon techs, Car was brought to us in the summer to have the head gaskets redone everything as normal. Customer came back a few weeks later complaining that he had start up smoke-blue- and started using oil. we got car back and pulled motor. First thing we... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2012 Acura RDX SH-AWD 2.3L Stall, Misfire VIN: 5J8TB1H5XC Thanks for all of the reply's. Most of you thought there were tight valves causing the problem. I did not check the valve clearances. I thought it was the wrong way to go. The car would misfire/stall intermittantly. This vehicle would only misfire after drivin... |
8 | |
| 1992 Honda Civic CX 1.5L No Start VIN: 2HGEH2345N Car is still not starting have re checked all power and grounds to pcm. Ignition switch checked no problems found. Main relay replaced with oem part. Its a very intermittent problem still going to check it further if i can get it not to start. Thanks for a... |
40 | |
| 2007 Honda Pilot LX 3.5L MIL Lamp on VIN: 5FNYF28157 Thanks for all the replys. But I don't think anyone read the related repairs section. It stated " new spool valve assym with oil pressure sensor and multiple oil changes". Low oil pressure was the problem, I found 10psi at idle and 30 psi at 3000 rpm... Trouble codes: P2647. |
8 |
