 Prev |
Professional Automotive Repair Technical Discussions for January 20, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2006 Ford Escape XLS 2.3L Cuts out VIN: 1FMYU02Z36 Ford Techs this little pita came in with the inst cluster warning lights on and the odo not reading. The inst cluster was replaced was replaced and I was called in to program it. But it didn't have communication. The tech worked on it and communication came ba... |
View | |
| 2012 Ford F-150 FX4 3.5L MIL Lamp on VIN: 1FTFW1ET9C Code p0172 system rich bank1 graphed both upstream sensors very much the same, long termfuel trim bank1 -24.1, bank2 -15.5, short term trims bank1 3.8, bank2 .7 highpressure fuel actual 1530mpa, desired 1450mpa truck starts and runs very well no drivability co... Trouble codes: P0172 (System rich bank1) |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2002 Ford Ranger Edge 3.0L Misfire VIN: 1FTYR44V32 Well, I should have known better. Don't EVER load up the parts cannon. The misfire was being caused by the bad exhaust valves. When I ran the cylinder leak down test, I was supplying 90psi and could only build up 10psi. After removing the cylinder heads I po... Trouble codes: P0304 (Cylinder 4 Misfire). |
11 | |
| 2004 Ford F-350 Super Duty XL 6.0L Draw VIN: 1FDWX37P64 Thanks for all the replies. After really digging into the wiring and how it all works, found that the coolant temp sensor wiring near the sensor was bad. replaced the connector, and the glow plug relay, because new was faulty. thanks again for the replies and ... |
8 | |
| 2010 Ford E-450 Super Duty 6.8L Drive Line VIN: 1FDXE4FS0A thank you who reply. truck is fixed.i have seen multi time torn and compeletly broken motor mount but never caused the drive train vibration.did not see any wobble from the driveshaft even over 60 mph but truck would shack when hit 60mph on the lift.so we remo... |
7 |
