 Prev |
Professional Automotive Repair Technical Discussions for October 6, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2005 Chrysler 300 C 5.7L MIL Lamp on VIN: 2C3AA63HX5 I am looking for A known good cam crank waveform for this car if anyone has one please let me know thanks for looking |
View | |
| 2006 Chrysler 300 Touring 3.5L No Start VIN: 2C3KA53G16 Have no start with no communication from any control module. Tried 2 different scan tools. Can spray starting fluid through throttle body and engine will run for 5 to 10 seconds. Really not sure what to test next, other than need to establish communication wit... |
View | |
| 2007 Jeep Wrangler X 3.8L traction control VIN: 1J4FA24147 Hello iATN, we have this Jeep here that falsely kicks on the traction control under acceleration intermittently. When this happens, the TC light flashes as if the wheel(s) is (are) spinning and the throttle is cut so you can't accelerate. I've driven it with t... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2005 Dodge Grand Caravan SXT 3.8L emergency brake VIN: 2D4GP44L55 Thanks to all replied. I finally got the vehicle back and drove around for some time with the emergency brake on slightly, and I got the shoes to seat in and it holds much better. Thanks again for all who replied. |
9 | |
| 2008 Dodge Sprinter 3500 3.0L Steering angle sensor VIN: WDYP445758 The owner had taken the vehicle on a road trip and will be back in the spring. I need to look into the possibility of reflashing the module to see if its possible that flash a 2015 software load since it's a 2008. Based on my experience with the Freightliner d... |
3 | |
| 2008 Jeep Grand Cherokee Limited 3.0L No Start, Almost starts VIN: 1J8HR58M88 Wade from Colorado hit this one on the head. Doing a pin-by-pin circuit check at the PCM, we found the water-in-fuel sensor signal circuit shorted to ground. Unplugging the sensor made no change, so we started chasing wires. We found the wiring harness from ... Trouble codes: P0607 (ECM Internal Circuit Malfunction). |
3 |
