 Prev |
Professional Automotive Repair Technical Discussions for August 10, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2010 BMW X5 xDrive30i 3.0L Lighting VIN: 5UXFE4C58A Vehicle is from a dealer.Initial complaint was rear liftgate malfunctioning and radio inop.There were moisture problems in rear of vehicle.Found bad oxidation on one of connectors for liftgate module.Cleaning actually restored function of liftgate!Did a hard b... |
View | |
| 2011 Mercedes-Benz GL450 4.6L puch button starting VIN: 4JGBF7BE2B Hello,I have this 2011 GL450 with inoperative push button starting.Here is the backstory.car came in needing right front airstrut and right rear hydraulic shock absorber.{yes I know you need to do both sides,this is for a warranty company}' The push button st... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2011 BMW 335d 3.0L Mechanical VIN: WBAPN7C51B I didn't think about looking for a TSB on this one. Brett was right on. We did replace both engine belts. We probably should have replaced JUST the A/C belt. Check TSB's, check TSB's, check TSB's... Thanks for all the responses. Jeff |
8 | |
| 2002 Land Rover Range Rover HSE 4.6L brake pedal VIN: SALPM16472 Hello. I should have been more specific when I said I replaced the pump, it was an entire assembly with a new pressure switch and new accumulator. Ultimately, I replace the hydraulic booster and the brakes were back to normal. |
5 | |
| 1994 Mercedes-Benz SL600 6.0L No Start VIN: WDBFA76E3R after hours of checking relays and wiring i found a broken wire at computer connector.i soldered a new wire and all is good thanks to allreplies |
7 | |
| 2007 Mercedes-Benz R350 4Matic 3.5L Mechanical VIN: 4JGCB65E37 so no glycol found in trans fluid so we pulled pan and found some clutch material(very small amount) and no major metal..we then pulled valve body and checked all solenoid filter screens for debris..few pieces of the clutch material..we then checked all the s... |
8 |
