× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 5, 2016
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2004 Chrysler PT Cruiser Limited 2.4L Stall, MIL Lamp on, it's a Chrysler... VIN: 3C8FY68814
OK friends, this car is the devil's. here goes: came in with a p1604 (internal fault pcm) hard fault. car ran fine except a MIL on dash. checked pcm powers and grounds and they are good (no voltage drop greater than .5 on powers or grounds). so deemed it a f... Trouble codes: P1604 (Internal fault), P0031 (O2 sensor heater control circuit low b1/s1), P0037 (O2 sensor heater control circuit low b1/s2), P0032 (O2 sensor heater control circuit high b1/s2), P0038 (O2 sensor heater control circuit high b1/s2)
View
2004 Dodge Durango Limited 5.7L No Start VIN: 1D4HB58D64
We found no power to fuel pump (ground ok), power ok from the relay, and continuity from the pump and relay to the integrated power module. I see that others have had the same issue in other post. My questions are. 1) Has anyone bypassed the IPM by connecting ...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2006 Jeep Wrangler SE 2.4L Will Not Program VIN: 1J4FA29126
I'd like to bill this customer for wasting my time (I mean right NOW) but instead he will pay me over time. On the Monday following the Friday that I'd worked about 6 hours on this vehicle, I spent another two hours researching the problem then composing and ...
10
2007 Jeep Wrangler Unlimited X 3.8L Poor Idle Quality VIN: 1J4GB39157
Well, I've taken the Jeep to 2 shops. The consensus seems to be that it is a "vibration" in the engine rather than a stumble that may never be fixed unless I go with a new engine. I used almost all new parts on the rebuild such as pistons and bearings but I ...
19
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next