 Prev |
Professional Automotive Repair Technical Discussions for July 22, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2005 Jeep Grand Cherokee Limited 4.7L MIL Lamp on VIN: 1J4HR58NX5 Just replaced evaporator core(leaking). Once all back together, the check engine light is on always, even with key out of ignition. There are no codes. Inspected everything I could short of disassembling dash again, no smashed or pinched wires that i can see. ... |
View | |
| 2012 Jeep Wrangler Unlimited Sahara 3.6L RH valve train VIN: 1C4BJWEG5C the engine was ticking from the right side valve cover after getting warm it started to tick I replaced 2 lash adjusters and the tick was gone for about 5 mins then came back.Then we replaced the cylinder heads and lash adjusters and the noise came back. I rem... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1999 Chrysler Sebring JXi 2.5L No Start VIN: 3C3EL55H5X Hi all, here's the end story for now. Drove to the Chrysler dealer on old ecm. Plugged in used ecm and tech connected his scan tool and was able to go in and change the pin. Said he could not re-write the vin on this one. That made it start and run ok with one... Trouble codes: P1683, P1792, 37 (abssystem over voltage), 33 (abs warning lamp circuit). |
11 | |
| 2004 Dodge Dakota Sport 3.7L Turn Signals/Flasher VIN: 1D7HL38K64 Thank you for all that replied. You always hope the product you are getting is of the best quality. OEM or Aftermarket. I ordered another relay, aftermarket was faster. Now all is good, everything works like it is suppose too. Sometimes we beat our self up thi... |
7 | |
| 2006 Dodge Ram 2500 SLT 5.9L Transfer Case/ Driveshaft VIN: 3D7KS29C46 We were able to locate a new yoke with the balancer on it from Chrysler. We installed it, had the entire shaft rebalanced and the truck rides smooth Again. I want to thank all that offered advise. |
11 |
